Firewing for PIC18

Firewing for PIC18
Firewing for PIC18 Firewing for PIC18
Brand: Mecanique
Product Code: FWMB R02 PIC18
Availability: In Stock
Price: £15.95
Qty:  
      

Firewing for PIC18 is based around a powerful Microchip 8 bit microcontroller that can be clocked at up to 64MHz - with 32KB of ROM (program storage) and 1536 Bytes of working RAM, you will be able to realise many great projects using the free Firewing compiler or any compatible compiler (such as the Microchip "C" Compiler, Swordfish Compiler, Proton Development Suite (PDS) or PICBasic PRO GOLD Compiler)

An easy to use USB interface is provided, enabling you to both program your board and send and receive serial data to and from your PC. The board can be powered from the USB port or by an external supply, providing both 3.3v and 5v supplies for any connected shields or devices.  There are 21 input / output pins, 6 of which can be configured for analog input (ADC) and 2 for Pulse Width Modulation (PWM). Simply plug in some devices and sensors into the sockets or use a dedicated shield to get things going.

The board itself is pin compatible with the Arduino Uno and can be run at both 3.3v and 5v.  For complete Arduino shield compatibility, you should normally run the board at 5v.  If in doubt, drop us an email or use one of  these shields. Please note that the Firewing USB drivers do not currently work with Windows 10.

Accessories

Software

Additional Information

Processing

Microcontroller PIC18F25K22
Architecture 8 Bit
Flash ROM 32KB
RAM 1536 Bytes
Operating Voltage 3.3v or 5v
Operating Frequency 64 MHz                                                                                  


Input / Output

Total I/O Pins 21
Analog Inputs of which 6 can be configured as analog input
PWM of which 2 can be configured for hardware PWM
External Interrupts Multiple
Pin Voltage 3.3v or 5v
Pin Current Sink or source 25mA


PC Interface

USB CDC - Serial USB
Connector Mini B


Power

Power Connector 5.5mm x 2.1mm centre positive
Input Voltage 6V to 12V (9V recommended) - see note 1
5V 800mA available - see note 2
3.3V 300mA available - see note 3
  • Note 1 - Regulator maximum is 20V, but may cause too much heat over 12V
  • Note 2 - 500mA maximum when powered from USB
  • Note 3 - Taken from 5V current